Product added to cart
MikroTik Dual-Band 2.4/5GHz AP, 802.11ac
MPN: RB952Ui-5ac2nD-US
SKU: MIK-RB952UI-5AC2NDUS
UPC:
$48.66 $49.95
Notify Me When Available
Availability
Back Ordered
The hAP ac lite is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time.
Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.
RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
Product specifications | |
Product code | RB952Ui-5ac2nD-US |
CPU nominal frequency | 650 MHz |
CPU core count | 1 |
Size of RAM | 64 MB |
10/100 Ethernet ports | 5 |
Wireless chip model | QCA-9887 |
Wireless standards | 802.11a/n/ac |
Secondary wireless chip model | QCA9531 |
Secondary wireless standards | 802.11b/g/n |
Number of USB ports | 1 |
Power Jack | 1 |
Supported input voltage | 10 V - 30 V |
PoE in | Yes |
PoE out | Yes |
Dimensions | 113 x 89 x 28mm |
Operating System | RouterOS |
Tested ambient temperature | -30 + 70 C |
License level | 4 |
Antenna gain | 2 |
CPU | QCA9531 |
Max Power consumption | 8W |
USB slot type | USB type A |
USB Power Reset | Yes |
Number of chains | 1 |
Storage type | FLASH |
Storage size | 16 MB |
Wireless specifications
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 23 | -93 | 200 |
54MBit/s | 20 | -75 | 100 |
MCS0 | 23 | -93 | 200 |
MCS7 | 19 | -71 | 79 |
MCS9 | 16 | -63 | 40 |
2.4 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
1MBit/s | 22 | -96 | 158 |
11MBit/s | 22 | -89 | 158 |
6MBit/s | 20 | -93 | 100 |
54MBit/s | 18 | -74 | 63 |
MCS0 | 20 | -93 | 100 |
MCS7 | 16 | -71 | 40 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RB952Ui-5ac2nD | QCA9531 (650Mhz) 100M all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 40.6 | 493.0 | 117.4 | 480.9 | 217.0 | 111.1 |
Bridging | 25 bridge filter rules | 40.6 | 493.0 | 70.1 | 287.1 | 70.9 | 36.3 |
Routing | none (fast path) | 40.6 | 493.0 | 117.4 | 480.9 | 200.8 | 102.8 |
Routing | 25 simple queues | 40.6 | 493.0 | 79.6 | 326.0 | 90.8 | 46.5 |
Routing | 25 ip filter rules | 40.6 | 493.0 | 42.2 | 172.8 | 43.2 | 22.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MPN: | RB952Ui-5ac2nD-US |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
We found other products you might like!
Write Your Own Review