Cambium C000000L033A Gigabit Surge Suppressor 56V

Cambium Networks designs outdoor wireless broadband solutions to operate in the toughest of environments.  Lightning strikes are the most typical cause of system outages or failures of mast-mounted equipment especially when mounted as high as 300m.  The Gigabit Ethernet Surge Suppressor is critical for lightning protection to minimize the potential for damage.

Network operators should always follow best-practices for grounding and lightning protection. Doing so will minimize network outages and reduce the associated costs of tower climbs and equipment repair/replacement.

The Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber Module), PTP 450i and PTP 820S.  The unit ships suitable for mounting to a wall or pole.

PRODUCT FEATURES

• MODEL NUMBER C000000L033A
• TRANSFER RATE 1000 Base T
• CONNECTORS Two x RJ-45
• NOMINAL VOLTAGE 56V
• PROTECTION MODE Line-to-line and line-to-ground
• SURGE ARRESTOR TVS Diodes (Transient Voltage Suppression for longer operational life)
• SURGE CURRENT RATING, L-G, total 172A, 10/1000us
• RESPONSE TIME 5 nanoseconds typical
• MOUNTING Pole mount or wall mount
• DIMENSIONS 4.6 in. x 3.4 in. x 1.8 in. (118mm x 87.5mm x 46.5mm)
• WEIGHT 0.34 lbs (156 gm)
• WIND SURVIVAL 200 mph (321 km/hour)
• OPERATING TEMPERATURE -40° F (-40° C) to +140° F (+60° C)
• HUMIDITY 100% condensing
• ENVIRONMENTAL PROTECTION IP54 (Dust and Water Intrusion Protection)

Question: What is the differencebetween C000000L065A and C000000L033A?

Answer: The C000000L065A is designed for radios that operate on 30V power. The C000000L033A is designed for radios that operate on 56V power. They both support 1000BaseT Gigabit Ethernet. It is important that operators select and install the appropriate version of the Gigabit Surge Suppressor for the radio being deployed. Selecting the wrong voltage level surge suppressor will result in the radio not being sufficiently protected.