Need Help? (877) 271-9484
[email protected]

Tycon Solar MPPT Battery Charging Controller Voltage 12/24/36/48V 60A Solar 20A

MPN: TP-SC48-60-MPPT
SKU: TYCON-TP-SC48-60-MPPT
UPC:
$370.45 $389.95
Availability
Call for availability 877-271-9484

The Tycon Solar™ TP-SC48-60-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The 9ft battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V, 24V, 36V and 48V battery systems. There is a separate battery voltage input so that the controller can get very accurate readings of battery voltage. This removes voltage fluctuations seen because of large currents going through the battery cables.

They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load Current and Solar Current.

There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this configuration and the available Android or IOS mobile app, the solar controller can be monitored and controlled from a distance. There is also an RS485 port which allows sync of multiple controllers connected in parallel. A 36in RS485 interface cable is included.

They have multiple load operating modes which can be set through the buttons on the controller.

The load output has a soft start feature so it can smoothly and reliably power up high capacitance loads up to 20A. There is a convenient On/Off button to disconnect load power when the unit is operated in the default mode (15).

They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, over-discharge and over-temperature. The built-in overdischarge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery.

The units are protected against lightning strikes with TVS diode protection. They operate over a wide industrial temperature range. Electronics are conformal coated for environmental protection.

An automatic battery equalization charge automatically engages once every 30days (Programmable). The equalization charge helps to balance the batteries in an array and reduce the possibility of battery sulfation.

Connections are via 6 screw terminals for wire size up to 7AWG. The controllers are internally fused for protection, but we recommend always using an external 60A fuse between the controller and the battery. There are four screw holes for wall mounting. In addition, there are two DIN Rail brackets for DIN Rail mounting included

 

Features

  • MPPT Temperature Compensated Charging
  • Fully Automatic Operation
  • LCD Displays: Battery Volts, Battery Temp, Battery Level, Load Current and Solar Current
  • Autoranging 12/24/36/48V Battery Arrays
  • Multimode Load Operation – 5 selectable modes
  • Soft Start Load Output to Power High Capacitive Loads
  • Automatic 30day Battery Equalization
  • Conformal Coated Electronics for Environmental Protection
  • TVS lightning protection, Industrial Temperature Range
  • Low self consumption

Applications

  • Remote Power Systems
  • Solar Lighting
  • Solar Power Applications

 

 

More Information
MPN: TP-SC48-60-MPPT
ManufacturerTycon Power Systems
Show Group Special PriceNo

Rated Battery Voltage

12/24/36/48V (Auto-Detect),  70V Max

Rated Solar Current

60A Max

Max Solar Panel Size

12V Battery = 800W

24V Battery = 1600W

36V Battery = 2400W

48V Battery = 3200W

Rated Load Current

20A Max

Maximum Capacitive Load

10,000uF

Max Solar Input Voltage

150V (25C) ;  145V (-25C)

Max Power Point Range

+2VDC to 120VDC Battery Volts

Conversion Efficiency

98% Typ

MPPT Tracking Efficiency

>99%

Communication Port

RS232   (for TP-SC-BT1 only)

RS485   (for controller sync)

Self-Consumption

< 1W

Temperature Compensation

-3.0mV//Cell

Max Wire Size

7 AWG

Voltage / Current Accuracy

+/-2%

Grounding

Positive Ground

Environmental Protection

IP32

Certifications

CE,  RoHS

Operating Temp

-35°C to 55°C (-31°F to 131°F)

Dimensions

285x205x93mm (11x8x3.7”)

Weight

3.6Kg   (8lb)

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top