Product added to cart
MikroTik SXT SA5 ac RBSXTG-5HPacD-SA 802.11ac Point to Point CPE
MPN: RBSXTG-5HPACD-SA
SKU: MIK-RBSXTG-5HPACD-SA
UPC:
$119.00
Notify Me When Available
Availability
Back Ordered
The new AC standard is here, with up to 866Mbit over the air data rate, 256-QAM modulation and 80MHz channels. 802.11ac opens up new possibilities and speeds never possible before.
The SXT ac is a new member in our 802.11ac product lineup. Currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beamwidth sector antenna. Also supports 802.11a/n mode and is compatible with all legacy RouterBOARD devices, including Nstream and Nv2 protocols. Both devices come with Gigabit Ethernet.
New products are backwards compatible — for example, you can replace your 5GHz 802.11a/n legacy Access Point with the new 802.11ac product and your existing customers will still be able to connect to it.
RouterBOARD (RBSXTG-5HPacD-SA) has the 5GHz 90degree 14dBi SXT Sector antenna, upgraded with 720MHz CPU, 128MB RAM, onboard dual chain 5GHz high gain 1300mW 802.11ac wireless and RouterOS L4 license. It also has a Gigabit Ethernet port.
- 1300mW RF output
- Extended temperature range -30°C to +80°C
- Up to 540Mbps throughput
- Low latency Point to Point
Product specifications | |
Product code | RBSXTG-5HPacD-SA |
CPU nominal frequency | 720 MHz |
CPU core count | 1 |
Size of RAM | 128 MB |
10/100 Ethernet ports | None |
10/100/1000 Ethernet ports | 1 |
MiniPCI slots | 0 |
MiniPCI-e slots | 0 |
Wireless chip model | QCA9892-BR4A-R |
Wireless standards | 802.11ac |
Number of USB ports | 1 |
Power Jack | 0 |
PoE in | 802.3at |
Voltage Monitor | Yes |
CPU temperature monitor | No |
PCB temperature monitor | Yes |
License level | 4 |
Antenna gain DBI | 14 |
Current Monitor | No |
CPU | QCA9557-AT4A-R |
Max Power consumption | 12W |
SFP ports | None |
SFP+ ports | None |
USB slot type | USB type A |
Supported Voltage | 15-60V |
Number of chains | 2 |
Serial port | None |
Storage type | NAND |
Storage size | 128 MB |
Wireless specifications
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 31 | -96 | 1259 |
54MBit/s | 28 | -81 | 631 |
MCS0 | 30 | -96 | 1000 |
MCS7 | 27 | -77 | 501 |
MCS9 | 22 | -72 | 158 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RBSXTG-5HPacD-SA | QCA9557 1G all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 477.7 | 244.6 |
Bridging | 25 bridge filter rules | 81.2 | 986.1 | 118.4 | 485.0 | 119.5 | 61.2 |
Routing | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 408.2 | 209.0 |
Routing | 25 simple queues | 81.2 | 986.1 | 158.3 | 648.4 | 165.8 | 84.9 |
Routing | 25 ip filter rules | 64.8 | 786.9 | 70.4 | 288.4 | 60.9 | 31.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Antenna Pattern Horizontal 0 | Antenna Pattern Horizontal 90 |
Antenna Pattern Vertical 0 | Antenna Pattern Vertical 90 |
MPN: | RBSXTG-5HPACD-SA |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
We found other products you might like!
Write Your Own Review