Product added to cart
MikroTik RBGrooveGA 52 AC 2.4/5GHz AP 720MHz 64MB 11ac L4 US
MPN: RBGrooveGA-52HPacn
SKU: MIK-GROOVEA-5AC
UPC:
$95.00 $99.00
Notify Me When Available
Availability
Back Ordered
Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS.
Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless. The Groove supports 2.4GHz, 5GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4GHz and 802.11 ac/n/a for 5GHz).
Two models are available, Groove for CPE and PtP connections, and GrooveA which also supports AP mode.
The device has a built-in N-male connector and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
The Groove A (AP model) includes a Dual Band 2.4/5GHz Omni directional antenna (6dBi 2.4GHz,8dBi 5GHz), so you can use the unit right out of the box, or use your own antenna.
Box contains: Groove unit, mounting loops, PoE injector, power adapter, 6/8dBi 2.4/5GHz Omni antenna (Only A model).
Product specifications |
|
Product code | RBGrooveGA-52HPacn |
CPU nominal frequency | 720 MHz |
CPU core count | 1 |
Size of RAM | 64 MB |
10/100/1000 Ethernet ports | 1 |
Wireless standards | 802.11a/b/g/n/ac |
Wireless chip model | QCA-9889 |
Supported input voltage | 10 V - 30 V |
PoE in | Yes |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
Dimensions | 177 x 44 x 44 mm |
Operating System | RouterOS |
Tested ambient temperature | -40 +70 C |
License level | 4 |
CPU | QCA9556 |
Max Power consumption | 5W |
Number of chains | 1 |
Storage type | FLASH |
Storage size | 16 MB |
Wireless specifications
2.4 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
1MBit/s | 24 | -97 | 251 |
11MBit/s | 21 | -91 | 126 |
6MBit/s | 24 | -93 | 251 |
54MBit/s | 21 | -77 | 126 |
MCS0 | 24 | -93 | 251 |
MCS7 | 20 | -72 | 100 |
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 26 | -93 | 398 |
54MBit/s | 21 | -78 | 126 |
MCS0 | 26 | -93 | 398 |
MCS7 | 21 | -74 | 126 |
MCS9 | 19 | -69 | 79 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RBGrooveGA-52HPacn | QCA9556 1G one port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 576.7 | 295.3 |
Bridging | 25 bridge filter rules | 81.2 | 986.1 | 123.7 | 506.7 | 117.8 | 60.3 |
Routing | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 454.8 | 232.9 |
Routing | 25 simple queues | 81.2 | 986.1 | 152.6 | 625.0 | 137.2 | 70.2 |
Routing | 25 ip filter rules | 69.4 | 842.8 | 66.3 | 271.6 | 68.7 | 35.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MPN: | RBGrooveGA-52HPacn |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
Antenna Types | Embedded |
Wireless Standards | IEEE 802.11ac |
Write Your Own Review