Product added to cart
MikroTik RBGrooveA-52HPn, 600MHz CPU, RouterOS Level 4, 802.11a/b/g/n, 500mW Output Power
MPN: RBGrooveA-52HPn
SKU: MIK-RBGROOVEA52HPN
UPC:
$79.00
Notify Me When Available
Availability
Back Ordered
Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has 64MB of RAM and RouterOS license (support for AP, point-to-point or CPE)
With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni directional antenna (6dBi 2.4GHz, 8dBi 5GHz).
Product specifications |
|
| Product code | RBGrooveA-52HPn |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 64 MB |
| 10/100 Ethernet ports | 1 |
| Wireless chip model | AR9342 |
| Wireless standards | 802.11a/b/g/n |
| Supported input voltage | 9 V - 30 V |
| PoE in | Yes |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| Dimensions | 177x44x44mm, 193g |
| Operating System | RouterOS |
| Tested ambient temperature | -30°C to +70°C |
| License level | 4 |
| Antenna gain DBI | 6 |
| CPU | AR9342 |
| Max Power consumption | 6W |
| Number of chains | 1 |
| Storage type | FLASH |
| Storage size | 16 MB |
Wireless specifications
| 2.4 GHz | |||
| Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
| 1MBit/s | 27 | -97 | 501 |
| 11MBit/s | 27 | -91 | 501 |
| 6MBit/s | 27 | -93 | 501 |
| 54MBit/s | 24 | -75 | 251 |
| MCS0 | 27 | -93 | 501 |
| MCS7 | 23 | -70 | 200 |
| 5 GHz | |||
| Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
| 6MBit/s | 27 | -93 | 501 |
| 54MBit/s | 23 | -75 | 200 |
| MCS0 | 26 | -93 | 398 |
| MCS7 | 22 | -70 | 158 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
| RBGrooveA-52HPn | AR9342 100M 1 port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Bridging | 25 bridge filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Routing | 25 simple queues | 8.1 | 98.4 | 23.5 | 96.3 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
| MPN: | RBGrooveA-52HPn |
|---|---|
| Manufacturer | Mikrotik |
| Show Group Special Price | No |
Write Your Own Review