Product added to cart
MikroTik RB952Ui-5ac2nD-TC hAP ac lite tower 2.4/5GHz hAP 802.11ac AP(US)
MPN: RB952UI-5AC2NDTC
SKU: MIK-RB952UI-5AC2NDTC
UPC:
$57.25 $59.00
Availability
ONLY 3 LEFT!
The hAP ac lite tower is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time.
The hAP ac lite can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. Unit provides PoE output function for port 5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP ac lite is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license. RB952Ui-5ac2nD-TC-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.
- Dual chain wireless 2.4GHz
- Single chain wireless 5GHz
- 650MHz CPU
- 64MB of RAM
- Five x 10/100Mbps Ethernet ports
- Passive PoE output on port 5
- USB port for 3G/4G modem
Product specifications |
|
Product code | RB952Ui-5ac2nD-TC |
CPU nominal frequency | 650 MHz |
CPU core count | 1 |
Size of RAM | 64 MB |
10/100 Ethernet ports | 5 |
Wireless standards | 802.11a/n/ac |
Wireless chip model | QCA-9887 |
Secondary wireless standards | 802.11b/g/n |
Secondary wireless chip model | QCA9531 |
Number of USB ports | 1 |
Power Jack | 1 |
PoE out | Yes |
Supported input voltage | 10 V - 30 V |
PoE in | Yes |
Dimensions | 34 x 119 x 98mm |
Operating System | RouterOS |
License level | 4 |
Antenna gain | 2 |
CPU | QCA9531 |
Max Power consumption | 8W |
USB slot type | USB type A |
USB Power Reset | Yes |
Number of chains | 1 |
Storage type | FLASH |
Storage size | 16 MB |
Wireless specifications
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 23 | -93 | 200 |
54MBit/s | 20 | -75 | 100 |
MCS0 | 23 | -93 | 200 |
MCS7 | 19 | -71 | 79 |
MCS9 | 16 | -63 | 40 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RB952Ui-5ac2nD-TC | QCA9531 (650Mhz) 100M all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 40.6 | 493.0 | 117.4 | 480.9 | 217.0 | 111.1 |
Bridging | 25 bridge filter rules | 40.6 | 493.0 | 70.1 | 287.1 | 70.9 | 36.3 |
Routing | none (fast path) | 40.6 | 493.0 | 117.4 | 480.9 | 200.8 | 102.8 |
Routing | 25 simple queues | 40.6 | 493.0 | 79.6 | 326.0 | 90.8 | 46.5 |
Routing | 25 ip filter rules | 40.6 | 493.0 | 42.2 | 172.8 | 43.2 | 22.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MPN: | RB952UI-5AC2NDTC |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
Antenna Types | MIMO |
Frequency | 2.4 GHZ, 5.x GHz |
Wireless Standards | IEEE 802.11ac |
Switch PoE Port | 4-Port |
Switch Format | Desktop |
Write Your Own Review