Product added to cart
MikroTik RB911G-5HPacD-QRT 5GHz 802.11ac Outdoor AP/CPE with 24dBi Flat Panel Antenna
MPN: RB911G-5HPacD-QRT
SKU: MIK-RB911G-5HPacDQRT
UPC:
$195.00 $199.00
Notify Me When Available
Availability
Back Ordered
The QRT 5 ac is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backwards compatible with 802.11a/n.
Inside is the high power RB911G-5HPacD dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilize the benefit of 802.11ac high speed wireless.
Easy to use and quick to deploy, QRT is ideal for longer point to point links at 802.11ac speeds.
RB911G-5HPacD-QRT-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
Included:
- 24V 0.8A power adapter
- K-QRT screw kit
- QRT antenna mount
- Gigabit PoE injector
- U bolts
- U mast clamp
Product specifications |
|
| Product code | RB911G-5HPacD-QRT |
| CPU nominal frequency | 720 MHz |
| CPU core count | 1 |
| Size of RAM | 128 MB |
| 10/100/1000 Ethernet ports | 1 |
| Wireless chip model | QCA9882-BR4A-R |
| Wireless standards | 802.11ac |
| Number of chains | 2 |
| RF connector type | MMCX |
| Max Power consumption | 11.5W |
| Supported input voltage | 8V - 30V |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| Dimensions | 309x320x50mm |
| Operating System | RouterOS |
| Operating temperature range | -30C to +60C |
| License level | 4 |
| CPU | QCA9557-AT4A-R |
Antenna |
|
| Frequencies | 4.9-5.875 GHz |
| Gain | 24 dBi |
| VSWR | 1.37 : 1 |
| 3 dB Beam-Width, H-Plane | 10.5° |
| 3 dB Beam-Width, E-Plane, typ | 10.5° |
| Polarization | Dual, Vertical and horizontal |
| Port to Port Isolation | -50 dB |
| Cross polarization, min | -25 dB |
| Front to Back Ratio, min | 35 dB |
Wireless specifications |
|
| TX power / RX sensitivity | |
| TX/RX at MCS0 | 30dBm / -96dBm |
| TX/RX at MCS7 | 24dBm / -78dBm |
| TX/RX at 6Mbit | 30dBm / -96dBm |
| TX/RX at 54Mbit | 27dBm / -80dBm |
| Frequency range | 4920-6100 MHz |
Ethernet test results
| RB911G-5HPacD-QRT | QCA9557 1G all port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 477.7 | 244.6 |
| Bridging | 25 bridge filter rules | 81.2 | 986.1 | 118.4 | 485.0 | 119.5 | 61.2 |
| Routing | none (fast path) | 81.2 | 986.1 | 234.9 | 962.2 | 408.2 | 209.0 |
| Routing | 25 simple queues | 81.2 | 986.1 | 158.3 | 648.4 | 165.8 | 84.9 |
| Routing | 25 ip filter rules | 64.8 | 786.9 | 70.4 | 288.4 | 60.9 | 31.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
| MPN: | RB911G-5HPacD-QRT |
|---|---|
| Manufacturer | Mikrotik |
| Show Group Special Price | No |
Write Your Own Review