Product added to cart
Cambium ePMP 3000 5GHz Connectorized MU-MIMO 4x4 Access Point with GPS Sync, US
MPN: C058910A102A
SKU: CAMBIUM-C058910A102A
UPC:
$1,043.74
Special Price : (Login for Your Price)
Availability
In Stock - Direct Ship
ePMP 3000
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000™ is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-User MIMO (MU-MIMO). The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time.
MULTI USER MIMO
Achieving higher throughput in the downlink is often solved by achieving higher modulation or wider channels. In both cases, the environment and interference prevents achieving higher modulations or operating in wider channel bandwidths. ePMP 3000 employs Multi User Mimo technology (MUMIMO) to simultaneously transmit to two subscribers in the downlink and thus doubling the throughput in the downlink.
INTELLIGENT FILTERING
Noise is always a concern, and as more transmitters are deployed, will continue to be a critical factor in operation. While almost all radios have some type of filtering, many use static filters that block out only noise from outside of the radios total operating spectrum. While this provides a clear channel for operation, these systems with fixed filters still allow noise from neighboring channels to affect system performance. Cambium Networks solutions use dynamic filtering with a static filter to block noise from outside of the operating spectrum but also a dynamic filter to block out interference from adjacent channels. As the system changes to another channel, the system automatically blocks out noise from adjacent channels to improve signal quality.
FREQUENCY RE-USE
Frequency is limited. There will never be any more of it. By re-using frequencies when deployed in back-to-back configuration, a network operator can effectively use the same frequency twice to connect users. In large deployments, a network operator can connect thousands of users by re-using the same frequencies across the field service area. This technology maximizes the use of available frequency and can provide access to thousands of users in a small amount of spectrum.
GPS SYNCHRONIZATION
When networks become more dense, self interference becomes an issue. GPS synchronization coordinates the entire network, reduces self interference, and keeps network performance high as more subscribers are added.
SMART BEAMFORMING AND BEAM STEERING
As more emitters are deployed in the service area, it is important to mitigate noise and interference in order to provide reliable high speed connectivity. The ePMP 3000 Access Point works in conjunction with the optional Beam Steering antenna to create narrow beams in the uplink to improve signal to noise ratio. Placed at the access point on a tower, the smart antenna will create tighter beams to connect with subscribers while nulling out radiation from unwanted emitters in the field.
AIR FAIRNESS
ePMP employs a sophisticated priority-based, air fairness, starvation avoidance algorithm for allocating RF resources to SMs. The allocations are based on airtime instead of throughput and so we avoid the situation where SMs in poor RF conditions take up an excessive amount of time and therefore available capacity.
| MPN: | C058910A102A |
|---|---|
| Manufacturer | Cambium Networks |
| Show Group Special Price | Yes |
| Custom Stock Status | In Stock - Direct Ship |
| Antenna Types | Embedded |
| Frequency | 5.x GHz |
Product Specifications
• Model/Part #
• Channel Spacing Configurable on 5 MHz increments
• Frequency Range 4910 – 5980 MHz (exact frequencies as allowed by local regulations)
• Channel Width 20 | 40 | 80 MHz
• MAC (Media Access Control) Layer Cambium Proprietary
• Physical Layer 4X4 MUMIMO/OFDM
• Ethernet Interfaced 100/1000BaseT, rate auto negotiated, 802.3at compliant & Aux SFP port
• Powering Methods Supported 56 V PoE (included), standard 802.3at PoE Supply, or CMM5 with 56 V and 5 pin to 7 pin cross over cable adapter
• Protocols Used IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
• Network Management HTTPs, SNMPv2c, SSH
• VLAN 802.1Q with 802.1p priority
• Subscribers per Sector Up to 120
• ARQ Yes
• Nominal Receive Sensitivity (w/FEC) @20 MHz Channel MCS 0 , -92 MCS 8 supported by Wi-Fi -68
• Nominal Receive Sensitivity (w/FEC) @40 MHz Channel MCS0, -89 MCS9, -64
• Nominal Receive Sensitivity (w/FEC) @80 MHz Channel MCS0, -86, MCS9 - 61
• Modulation Levels (Adaptive) MCS0 (BPSK) to MCS 9 (256 QAM 5/6)
• GPS Synchronization Yes, via Internal GPS or Cambium Sync (Internal GPS receiver also contains a patch antenna and can be used without
&nsp; the external puck antenna)
• Quality of Service Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast,
Multicast and Station Priority, MIR/CIR support*
• DSO* Dynamic Spectrum Optimization. Ability to change channels based on interference detection on current channel
• Fast DFS* Change to alternate radar free channel with background availability check
• Antenna Sector Antenna (C050910D301A ) Available
• Transmit Power Range 0 to +32 dBm (combined, to regional EIRP limit) (2 dB interval)
• Sector Antenna Connection 4 x 50 ohm, RP (Reverse Polarity) SMA
• Beamforming Antenna Connection 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)
• GPS Antenna Connection 1 x 50 ohm, RP (Reverse Polarity) SMA
• Surge Suppression 1 Joule Integrated. C000000L033A - 56V Gigabit surge suppressor recommended for optimal surge protection
• Environmental IP55
• Temperature -30°C to +55°C (-22°F to +131°F)
• Power Consumption 25 W Maximum 1
• Input Voltage 44 V to 59 V
• Weight 0.7 kg (1.5 lbs) without brackets
• Dimensions (L x W x H) 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets
• Encryption 128 bit AES (CCMP mode)
• FCCID Z8H-89FT0024**
INDUSTRY CANADA 109W-0024**
CE EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz)**
Product Includes
(1) ePMP 3000 Access Point
(1) User Manual
Related Products
Write Your Own Review