Product added to cart
MikroTik RB912UAG-5HPnD-OUT BaseBox 5 5GHz 2x2 MIMO 1000mW 802.11a/n Outdoor Access Point, 2xRPSMA connectors
MPN: RB912UAG-5HPnD-OUT
SKU: MIK-RB912UAG5HPNDOUT
UPC:
$89.00
Availability
ONLY 4 LEFT!
The BaseBox in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
Box contains: RB912 outdoor unit, 24V 0.8A power adapter, gigabit PoE injector, mounting loop, DIN rail mount.
Product specifications | |
Product code | RB912UAG-5HPnD-OUT |
CPU nominal frequency | 600 MHz |
CPU core count | 1 |
Size of RAM | 64 MB |
Architecture | MIPS-BE |
10/100 Ethernet ports | 0 |
10/100/1000 Ethernet ports | 1 |
MiniPCI slots | 0 |
MiniPCI-e slots | 1 |
Wireless chip model | AR9342-BL1A |
Wireless standards | 802.11a/n |
Number of USB ports | 1 |
Power Jack | Yes |
802.3af support | No |
PoE | 8-30V DC |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
CPU temperature monitor | No |
Dimensions | 246x135x50mm |
Operating System | RouterOS |
Temperature range | -30°C to +60°C |
License level | L4 |
Current Monitor | No |
TX power | 30dBm |
CPU | AR9342-BL1A |
Max Power consumption | 14W at 24v |
SFP ports | 0 |
USB slot type | USB type A |
Number of chains | 2 |
Storage type | NAND |
Storage size | 64 MB |
Wireless specifications
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 30 | -96 | 1000 |
54MBit/s | 27 | -78 | 501 |
MCS0 | 30 | -96 | 1000 |
MCS7 | 26 | -75 | 398 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RB912UAG-5HPnD-OUT | AR9342 1G 1 port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.0 | 983.7 | 232.0 | 950.3 | 269.6 | 138.0 |
Bridging | 25 bridge filter rules | 81.0 | 983.7 | 86.0 | 352.3 | 87.6 | 44.9 |
Routing | none (fast path) | 81.0 | 983.7 | 210.0 | 860.2 | 226.9 | 116.2 |
Routing | 25 simple queues | 81.0 | 983.7 | 103.9 | 425.6 | 106.6 | 54.6 |
Routing | 25 ip filter rules | 56.8 | 689.8 | 59.6 | 244.1 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MPN: | RB912UAG-5HPnD-OUT |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
Frequency | 5.x GHz |
We found other products you might like!
Write Your Own Review