This product is an updated of the popular MikroTik CCR1009-8G-1S-PC.
The unit is equipped with a passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It's powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
Product Features
• No Switch-Chip: The device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
• Combo-Port: A single 1Gbit software interface that has two hardware interfaces - a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.
• 100Mbps SFP Support: This is the first MikroTik devices that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
• More Throughput: Due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.
This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.
Product Includes
• (1) CCR1009-7G-1C-PC Cloud Core Router
• (1) 24V 2.5A Power Adapter
• (1) USB Cable
• (2) Rack Ears
• (1) IEC Cord
Product specifications
|
| Product code |
CCR1009-7G-1C-1S+PC |
| CPU nominal frequency |
1 GHz |
| CPU core count |
9 |
| Size of RAM |
2 GB |
| 10/100/1000 Ethernet ports |
7 |
| Number of USB ports |
1 |
| Power Jack |
1 |
| Supported input voltage |
14 V - 57 V |
| PoE in |
Yes |
| Voltage Monitor |
Yes |
| CPU temperature monitor |
Yes |
| PCB temperature monitor |
Yes |
| Dimensions |
272x190x47mm |
| Operating System |
RouterOS |
| License level |
6 |
| Current Monitor |
Yes |
| CPU |
TLR4-00980CH-10CE-A3b |
| Max Power consumption |
33W |
| SFP+ ports |
1 |
| USB slot type |
microUSB type AB |
| USB Power Reset |
Yes |
| Serial port |
RS232 |
| Storage type |
NAND |
| Storage size |
128 MB |
| CPU Threads count |
9 |
Ethernet test results
| CCR1009-7G-1C-1S+PC |
Tile 9 core all port test 1GHz with combo-port and SFP+ |
| Mode |
Configuration |
1518 byte |
512 byte |
64 byte |
| kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
| Bridging |
none (fast path) |
1,300.4 |
15,792.1 |
3,759.4 |
15,398.5 |
14,874.0 |
7,615.5 |
| Bridging |
25 bridge filter rules |
1,100.4 |
13,363.3 |
1,183.8 |
4,848.8 |
1,184.0 |
606.2 |
| Routing |
none (fast path) |
1,300.4 |
15,792.1 |
3,759.4 |
15,398.5 |
14,581.0 |
7,465.5 |
| Routing |
25 simple queues |
1,300.4 |
15,792.1 |
1,686.0 |
7,175.6 |
1,699.6 |
1,142.1 |
| Routing |
25 ip filter rules |
615.8 |
7,478.3 |
660.9 |
2,812.8 |
668.3 |
449.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Business Systems Connection
