Veracity HIGHWIRE QUAD Ethernet over Coax Converter (4-Port)

VER-VHW-HWQ
VHW-HWQ
Veracity

In stock

$320.00

Only 1 left

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

The Veracity HIGHWIRE QUAD Ethernet over Coax Converter (4-Port) integrates a 4-port PoE switch, allowing you to replace an old analog video camera with up to 4 IP cameras. It also turns the legacy 12V or 24V power into a universal Power over Ethernet (PoE) supply.

Speed, duplex, and crossover are sensed on connection of the HIGHWIRE Ethernet over Coax Converter, thus requiring no setup. In addition, no configuration is required when you connect the unit in place of the old analog camera, and a regular HIGHWIRE at the other end of the cable, as the link will be established automatically. Using universal IEEE 802.3af standard, the HIGHWIRE QUAD can not only detect power but also enable it for IP cameras, with up to 30W for devices such as fixed IP megapixel or dome cameras.

The HIGHWIRE QUAD Ethernet over Coax Converter is invisible to Ethernet data, and does not need a MAC or IP address. Besides auto-optimizing for all 75 ohm coaxial cables, the long connection range of the converter makes it suitable for network connections beyond 328' (100m).

Featuring a universal power input, the HIGHWIRE QUAD Ethernet over Coax Converter is ideal for low-voltage installations and can also be used on legacy coaxial cables. Compared to Cat5 cables, the coaxial cables coil and bend appropriately, making the converter appropriate for allowing network access to elevator carriages, VoIP, security, lift panel, and other devices.

  • Integrates 4-port PoE switch
  • Allows to replace an old analog video camera with up to 4 IP cameras
  • Turns legacy 12V or 24V power into a universal Power over Ethernet (PoE) supply
  • Automatically detects and enables power to IP cameras using the universal IEEE 802.3af
  • Up to 30W for devices such as fixed IP megapixel or dome cameras
  • Speed, duplex, and crossover are sensed on connection
  • No need for MAC or IP address
  • Invisible to Ethernet data
  • Auto-optimizing for all 75 ohm coaxial cables
  • Long connection range of up to 1650' (500m) of RG-11 cable, or 930' (280m) of CCTV-grade RG-59 cable
  • Suitable for network connections beyond 328' (100m)
  • Universal power input
  • Ideal for low-voltage installations; can be used on legacy coaxial cables
  • Coaxial cables coil and bend appropriately compared to Cat5 cables - converter appropriate for allowing network access to elevator carriages, VoIP, security, lift panel and other devices
  • No modification needed when used with 50 ohm coax or cables of other impedance
  • Detachable mounting lugs and a tough extruded enclosure
Product Condition New
Manufacturer part number VHW-HWQ
Manufacturer Veracity
Specifications

Range:

Auto-optimizing for all 75 Ohm coaxial cable:
280m (920ft) full-rate over video-grade RG-59 (Up to 350m depending on quality)
350m (1150ft) full-rate over RG-6
500m (1640ft) full-rate over RG-11

Network:

4-port unmanaged Ethernet switch
Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex
Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables

POE out:

IEEE 802.3af compliant PSE
Max power out 30W, isolated
(Allocated by IEEE power class)

Power in:

Auto type and polarity detection with detachable screw terminal connector
10-40V DC (max current 3.2A at 12V)
20-28V AC (max current 1.6A at 24V)

Dimensions:

92 x 111 x 32mm (3.62 x 4.37 x 1.26in)
107 x 140 x 32mm (4.21 x 5.51 x 1.26in) including connector and mounting lugs
290g (10.2oz)
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 

Range:

Auto-optimizing for all 75 Ohm coaxial cable:
280m (920ft) full-rate over video-grade RG-59 (Up to 350m depending on quality)
350m (1150ft) full-rate over RG-6
500m (1640ft) full-rate over RG-11

Network:

4-port unmanaged Ethernet switch
Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex
Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables

POE out:

IEEE 802.3af compliant PSE
Max power out 30W, isolated
(Allocated by IEEE power class)

Power in:

Auto type and polarity detection with detachable screw terminal connector
10-40V DC (max current 3.2A at 12V)
20-28V AC (max current 1.6A at 24V)

Dimensions:

92 x 111 x 32mm (3.62 x 4.37 x 1.26in)
107 x 140 x 32mm (4.21 x 5.51 x 1.26in) including connector and mounting lugs
290g (10.2oz)