Veracity Highwire Ethernet over Coax Converter (Single)

VER-VHW-HW
VHW-HW
Veracity

$169.00

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

The Veracity Highwire Ethernet over Coax Converter (Single) converts analog video cables into a high-speed network connection. Using the converter, you can replace analog IP cameras with IP cameras without installing any new cables.

Speed, duplex, and crossover are sensed on connection of the Highwire Ethernet over Coax Converter, thus requiring no setup. No configuration is required when you connect the unit to each end of the coaxial cable, as the link will be established automatically.

The Ethernet over Coax Converter is invisible to Ethernet data, and does not need a MAC or IP address. Besides auto-optimizing for all 75 ohm coaxial cables, the long connection range of the converter makes it suitable for network connections beyond 328' (100m).

Featuring a universal power input, the Highwire Ethernet over Coax Converter is ideal for low-voltage installations and can also be used on legacy coaxial cables. Compared to Cat5 cables, the coaxial cables coil and bend appropriately, making the converter apt for allowing network access to elevator carriages, VoIP, security, lift panel, and other devices.

  • Converts analog video cables into a high-speed network connection
  • Allows to replace analog IP cameras with IP cameras without installing any new cables
  • Speed, duplex, and crossover are sensed on connection
  • No need for MAC or IP address
  • Invisible to Ethernet data
  • Auto-optimizing for all 75 ohm coaxial cables
  • Long connection range of up to 1650' (500m) of RG-11 cable, or 930' (280m) of CCTV-grade RG-59 cable
  • Suitable for network connections beyond 328' (100m)
  • Universal power input
  • Ideal for low-voltage installations; can be used on legacy coaxial cables
  • Coaxial cables coil and bend appropriately compared to Cat5 cables - converter apt for allowing network access to elevator carriages, VoIP, security, lift panel and other devices
  • No modification needed when used with 50 ohm coax or cables of other impedance
  • Optional wall-mounting brackets and a rack-mount
Product Condition New
Manufacturer part number VHW-HW
Manufacturer Veracity
Specifications
Interface Connector type: BNC 75ohm

Cable impedance: 75ohm (RG59 or similar)

Data throughput max: 200Mbps (total up + down). Auto-adaptation to cable conditions
Range Auto-optimizing for all 75ohm coaxial cables:

920' (280 m) full-rate over video-grade RG-59 (Up to 1150'/350 m depending on quality)

1150' (350 m) full-rate over RG-6

1640' (500 m) full-rate over RG-11
Network Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex

Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables
Ethernet Connector type: RJ45

Cable type: Straight through or cross-over, auto detected

Rates supported: 100BaseT / 10BaseT, full/half duplex with auto negotiation
Indicators Green - Constant: Power OK, Full HIGHWIRE data link
Green - Slow: Power OK, Auto-adapted HIGHWIRE data link
Green - Blink: Power OK, no HIGHWIRE link
Green - Off: No power
Amber - Constant: Ethernet link On
Amber - Blink: Network traffic
Power Connector type: Screw terminals with detachable plug

Power supply type: IEC Class II isolated only

Operating voltage: Nominal 12V DC (9-24V working range) or 24V AC (type and polarity auto detected)

Supply current: 200mA (12V), 100mA (24V)
Environment Operating temp.: 14 - 122°F (-10 ~ +50ºC)

Relative humidity: 85% non-condensing

Grounding: Chassis should be grounded and is connected to the BNC shield.
Dimensions 3.3 x 2.1 x 1" (84 x 54 x 24mm)
With Connector: 4 x 2.1 x 1" (102 x 54 x 24mm)
Weight 3.9 oz (110g)
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
Interface Connector type: BNC 75ohm

Cable impedance: 75ohm (RG59 or similar)

Data throughput max: 200Mbps (total up + down). Auto-adaptation to cable conditions
Range Auto-optimizing for all 75ohm coaxial cables:

920' (280 m) full-rate over video-grade RG-59 (Up to 1150'/350 m depending on quality)

1150' (350 m) full-rate over RG-6

1640' (500 m) full-rate over RG-11
Network Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex

Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables
Ethernet Connector type: RJ45

Cable type: Straight through or cross-over, auto detected

Rates supported: 100BaseT / 10BaseT, full/half duplex with auto negotiation
Indicators Green - Constant: Power OK, Full HIGHWIRE data link
Green - Slow: Power OK, Auto-adapted HIGHWIRE data link
Green - Blink: Power OK, no HIGHWIRE link
Green - Off: No power
Amber - Constant: Ethernet link On
Amber - Blink: Network traffic
Power Connector type: Screw terminals with detachable plug

Power supply type: IEC Class II isolated only

Operating voltage: Nominal 12V DC (9-24V working range) or 24V AC (type and polarity auto detected)

Supply current: 200mA (12V), 100mA (24V)
Environment Operating temp.: 14 - 122°F (-10 ~ +50ºC)

Relative humidity: 85% non-condensing

Grounding: Chassis should be grounded and is connected to the BNC shield.
Dimensions 3.3 x 2.1 x 1" (84 x 54 x 24mm)
With Connector: 4 x 2.1 x 1" (102 x 54 x 24mm)
Weight 3.9 oz (110g)