Product added to cart
TYCON UPS-DC1248-9 UPS Pro, DieCast Enclosure
MPN: UPS-DC1248-9
SKU: TYCON-UPS-DC1248-9
UPC:
$189.95 $199.95
Availability
Call for availability 877-271-9484
Polycarbonate Enclosure, 12V 18Ah Batt, 24V POE, Solar Ready. 24hr backup @ 7W
- Protects sensitive electronics from damaging power line surges
- Provides 24hour battery backup @ 3.5 W load or 12 hours @7W load per 9Ah battery
- Powered Over CAT5 Ethernet cable
- Several POE voltages available (12V, 18V, 24V and 48VDC)
The UPS Pro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.
Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the POE input and/or solar power. The controller has a secondary wire terminal output which equals the battery voltage for connecting multiple pieces of equipment to the battery power, in addition to the POE output.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Most models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or instead of the POE power supply.
Multiple configurations are available for 12V or 24V systems with various battery storage capacities and POE output voltages.
A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9AH battery at room temperature or 17 hours at -20 deg C.
Features
- Weatherproof Nema 4X / IP65, UV resistant, outdoor enclosures
- Powered over CAT5 cable using POE and/or Solar
- Solar Assist. models with integrated solar panels
- Generous interior space for customer electronics
- Wall or Pole Mounting
- Isolates Customer Equipment from Power Line Surges
- High Quality AGM VR Sealed Lead Acid Batteries
- Advanced battery charge controller protects against overcharge and over discharge
Applications
- Wireless Base Stations and Clients
- Surveillance Cameras
- Wireless Bridge and Repeaters
- Remote Sensors
- Mission critical outdoor power
- Backup Power Systems
MPN: | UPS-DC1248-9 |
---|---|
Manufacturer | Tycon Power Systems |
Show Group Special Price | No |
POE Output Voltage Available (DC) |
48V |
Available Capacities (Amp Hours) |
8.5Ah |
Total Output Power |
30W |
Maximum POE Input Voltage |
57V |
Battery Voltage (DC) |
12V |
Battery Type |
Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM) |
Battery Life |
5 Years |
Controller Type |
Dual Input Solar/POE, PWM, 12V 8A Max Solar Panel Size 135W |
Overcharge Protection |
14.4V |
Over-discharge protection |
11.0V |
Over-discharge recovery voltage |
12.0V |
Controller Self Consumption |
<0.5W |
Charging POE Power Supply |
120/220VAC In ; 24VDC 60W Out |
Enclosure Type |
Die Cast Aluminum |
Enclosure External Size |
11 x 8.5 x 3.5” (279 x 216 x 89mm) |
Enclosure Internal Size |
10 x 7.75 x 3” (254 x 197 x 76mm) |
Space available for Customer Electronics |
7.75 x 5 x 1.25” (197 x 127 x 32mm) |
Operating Temperature |
-30°C to +60°C (-22°F to 140°F) |
System Weight (without batteries) |
4lb (1.8kg) |
Battery Weight (each) |
5.5lb (2.5kg) |
Warranty |
3 Years |
Write Your Own Review