Planet FNSW-1600P 19" 16-Port 10/100Mbps Unmanaged PoE Fast Ethernet Switch (125W PoE Budget)

PLA-FNSW-1600P
FNSW-1600P

In stock

Regular Price: $198.00

Only 1 left

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

Centralized Power Distribution for Fast Ethernet PoE Networking
To fulfill the needs of higher power required PoE network applications with 10/100Mbps transmission, PLANET FNSW-1600P’s PoE power output is upgraded from IEEE 802.3af PoE to IEEE 802.3at PoE+. It features 16 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector function that combines up to 30 watts of power output and data per port over one Cat5E/6 Ethernet cable. It is specifically designed for powered devices (PDs) such as PTZ cameras that consume high power.

Maximum Wire-speed Throughput
The FNSW-1600P features a high-performance switch architecture capable of providing the non-blocking 3.2Gbps switch fabric and wire-speed throughput as high as 2.38Mpps, thus increasing the bandwidth demand for LANs. Besides, the 802.3x full-duplex flow control function of the FNSW-1600P enables PDs and servers to be directly connected to the Switch for wire-speed packet transfer without the risk of packet loss.

Easy and Cost-effective Network Deployment
With the simultaneous transmission of data and power over Ethernet over a cable, the FNSW-1600P does not need extra cables and electrical outlets on the wall, ceiling or any unreachable place for extended network deployments. It thus helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians. With a total power budget of 125 watts, the FNSW-1600P is ideal for small businesses and workgroups wanting to deploy a PoE network equipped with wireless access points, IP surveillance cameras and IP phones in any places easily and efficiently.

Easy and Cost-effective Network Deployment

Applications

Power Centrally Controlled
Providing 16 802.3at PoE+ in-line power interfaces, the FNSW-1600P can easily build a power that centrally controls IP phone system, IP camera system and wireless AP group for enterprises. IP cameras can be installed around the corner in the company or campus for surveillance demands. Wireless APs can be deployed to build a wireless roaming environment. Without the need for electrical outlets, the Switch makes the installation of cameras and wireless APs easier and more efficient.

Power Centrally Controlled

Product Condition New
Manufacturer part number FNSW-1600P
Manufacturer Planet Technology
Specifications

Hardware Specification

Copper Ports 16 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
PoE Inject Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
LED Indicators System: Power(Green)
Port 1 to Port 16:
 10/100 LNK/ACT (Green)
 PoE-in-Use (Orange)
Switch Architecture Store-and-Forward
Address Table 8K entries, automatic source address learning and aging
Switch Fabric 3.2Gbps/non-blocking
Throughput (packet per second) 2.38Mpps@64 bytes
Power Requirements AC 100~240V, 50/60Hz, 2A max.
Power Consumption Max. 133.3 watts/457.4 BTU
Dimensions (W x D x H) 445 x 207 x 45 mm
Weight 2330g

Power over Ethernet

PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type Mid-span
PoE Power Output Per port 52V DC ( max.30.8 watts)
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 125 watts

Standard Conformance

Regulation Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

Environment

Operating Temperature: 0 ~ 50 degrees C 
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Key Features Physical Port
  • 16 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector
Power over Ethernet
  • Complies with IEEE 802.3at Power over Ethernet Plus/mid-span PSE
  • Supports PoE power up to 30 watts for each PoE port
  • 125W PoE power budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
Switching
  • Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • Automatic address learning and address aging
Case and Installation
  • 19-inch desktop size, 1U height
  • LED indicators for PoE ready, PoE activity
  • 2 silent fans to provide stable and efficient power performance
  • Rack-mountable, Plug-and-Play installation
Switch Format Rackmount
Switch Port 16-Port
Switch PoE Port 16-Port
POE Compliant PoE+, 802.3 AT
Switch Type POE/Power Over Ethernet, Unmanaged
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 

Hardware Specification

Copper Ports 16 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
PoE Inject Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
LED Indicators System: Power(Green)
Port 1 to Port 16:
 10/100 LNK/ACT (Green)
 PoE-in-Use (Orange)
Switch Architecture Store-and-Forward
Address Table 8K entries, automatic source address learning and aging
Switch Fabric 3.2Gbps/non-blocking
Throughput (packet per second) 2.38Mpps@64 bytes
Power Requirements AC 100~240V, 50/60Hz, 2A max.
Power Consumption Max. 133.3 watts/457.4 BTU
Dimensions (W x D x H) 445 x 207 x 45 mm
Weight 2330g

Power over Ethernet

PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type Mid-span
PoE Power Output Per port 52V DC ( max.30.8 watts)
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 125 watts

Standard Conformance

Regulation Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

Environment

Operating Temperature: 0 ~ 50 degrees C 
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
 
 

Also Purchased

You may also be interested in the following product(s)