Product added to cart
MikroTik RBwAPG-5HacT2HnD-BE-US wAP ac, 2.4/5GHz, 3x3 MIMO, Small Form-Factor Black Outdoor Enclosure
MPN: RBwAPG-5HacT2HnD-BE-US
SKU: MIK-APG5HacT2HnDBEU
UPC:
$89.00
Notify Me When Available
Availability
Back Ordered
The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.
The device has one Gigabit Ethernet port, it supports 802.11ac technology and can work at both the 2.4GHz and 5GHz frequencies simultaneously. It looks unobtrusive and sleek.
The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.
RBwAPG-5HacT2HnD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
Included parts:
- Gigabit PoE injector
- K35 screw kit
- wAP mount
- 24V 0.8A power adapter
- Plastic zip tie
Product specifications | |
Product code | RBwAPG-5HacT2HnD |
CPU nominal frequency | 720 MHz |
CPU core count | 1 |
Size of RAM | 64 MB |
10/100/1000 Ethernet ports | 1 |
Wireless chip model | QCA9880 |
Wireless standards | 802.11a/n/ac |
Secondary wireless standards | 802.11b/g/n |
Secondary wireless chip model | QCA9556 |
PoE in | 802.3at |
Supported input voltage | 11 V - 57 V |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
Dimensions | 185 x 85 x 30 mm |
Operating System | RouterOS |
Tested ambient temperature | -40 to +50C |
License level | 4 |
Antenna gain | 2 |
CPU | QCA9556 |
Max Power consumption | 12W |
Number of chains | 3 |
Storage type | FLASH |
Storage size | 16 MB |
Wireless specifications
5 GHz | |||
Transmit power (dBm) | Receive Sensitivity | Transmit power (mW) | |
6MBit/s | 25 | -96 | 316 |
54MBit/s | 25 | -81 | 316 |
MCS0 | 25 | -96 | 316 |
MCS7 | 24 | -77 | 251 |
MCS9 | 23 | -72 | 200 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
RBwAPG-5HacT2HnD | QCA9556 1G one port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 576.7 | 295.3 |
Bridging | 25 bridge filter rules | 81.2 | 986.1 | 123.7 | 506.7 | 117.8 | 60.3 |
Routing | none (fast path) | 81.2 | 986.1 | 233.1 | 954.8 | 454.8 | 232.9 |
Routing | 25 simple queues | 81.2 | 986.1 | 152.6 | 625.0 | 137.2 | 70.2 |
Routing | 25 ip filter rules | 69.4 | 842.8 | 66.3 | 271.6 | 68.7 | 35.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
MPN: | RBwAPG-5HacT2HnD-BE-US |
---|---|
Manufacturer | Mikrotik |
Show Group Special Price | No |
Write Your Own Review