MikroTik RBGroove-52HPn - MikroTik Groove 52HPn 2.4GHz or 5.875GHz CPE MikroTik RBGroove-52HPn - MikroTik Groove 52HPn 2.4GHz or 5.875GHz CPE
MikroTik RBGroove-52HPn - MikroTik Groove 52HPn 2.4GHz or 5.875GHz CPE

MikroTik RBGroove-52HPn - MikroTik Groove 52HPn 2.4GHz or 5.875GHz CPE

MIK-RBGROOVE52HPN
RBGroove-52HPn
Mikrotik

In stock

$59.00

Only 2 left

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Specifications

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power!

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

CPE or AP versions are available. Groove runs RouterOS with all it’s features.

Box contains: Groove unit, mounting loops, PoE injector, power adapter

MikroTik Groove 52HPn Specifications:
• CPU: AR9342 600MHz
• RAM: 64MB
• Connector: N-male
• Ethernet: (1) 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU up to 2030
• Wireless: 5.875GHz or 2.4GHz (software selectable)
• Extras: Reset switch, beeper, voltage monitor, temperature monitor
• Power: Passive 9-30V PoE only. 16KV ESD protection on RF port. Up to 0.19A at 24V (4.56W)
• Dimensions: 6.96 x 1.73 x 1.73 inches (177 x 44 x 44mm)
• Operating Temperature: -22°F to 158°F (-30°C to 70°C)
• Router OS: Level 3 license

Product Includes:
One (1) MikroTik Groove 52HPn
One (1) 24V power adapter
One (1) PoE Injector
Two (2) Mounting straps

Details

Product code RBGroove-52HPn
CPU nominal frequency 600MHz
CPU core count 1
Size of RAM 64MB
10/100 Ethernet ports 1
10/100/1000 Ethernet ports no
MiniPCI slots 0
Wireless chip model Yes
Wireless standards 802.11a/b/g/n
PoE 9-30V
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 177x44x44mm, 193g
Operating System RouterOS
Temperature range -30C to +70C
License level L3
Current Monitor No
TX power 27dBm
CPU AR9342
Max Power consumption Up to 0.19A at 24V (4.56W)

Wireless specifications

2.4 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
1MBit/s 27 -97 501
11MBit/s 27 -91 501
6MBit/s 27 -93 501
54MBit/s 24 -75 251
MCS0 27 -93 501
MCS7 23 -70 200
5 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 27 -93 501
54MBit/s 23 -75 200
MCS0 26 -93 398
MCS7 22 -70 158

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RBGroove52HPn AR9342 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 87.6 44.9
Routing none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Routing 25 simple queues 8.1 98.4 23.5 96.3 106.6 54.6
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 60.5 31.0
  • All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  • Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  • Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  • Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Product Condition New
Manufacturer part number RBGroove-52HPn
Manufacturer Mikrotik
Frequency 2.4 GHZ, 5.x GHz
Antenna Type CPE/Subscriber
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.