MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version) MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version) MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version) MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version) Included parts: Gigabit PoE injector Included parts: 24V 0.38A power adapter
MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version)

MikroTik LDF 5 ac 5GHz 9dBi 802.11ac 2x2 L3 for long distance links with satellite offset dish antennas (ROW Version)

MIK-RBLDFG-5ACD
RBLDFG-5acD
Mikrotik

$58.00
  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Specifications

International Version

The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal.

This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

LDF 5 ac is equipped with a Gigabit port and supports 802.11ac for higher throughput.

- LDF 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- LDF 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Specifications

Product code RBLDFG-5acD
Architecture ARM 32bit
CPU IPQ-4018
CPU core count 4
CPU nominal frequency 716 MHz
Dimensions 84mm x 84mm x 115mm
License level 3
Operating System RouterOS
Size of RAM 256 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -40°C .. +70°C

Powering

Max Power consumption 8W
PoE in Passive PoE
PoE in input Voltage 10-28 V
Number of DC inputs 1 (PoE-IN)

Wireless

Wireless 5 GHz number of chains 2
Wireless 5 GHz standards 802.11a/n/ac
Antenna gain dBi for 5 GHz 9
Wireless 5 GHz chip model IPQ-4018

Ethernet

10/100/1000 Ethernet ports 1

Wireless specifications

5 GHz Transmit (dBm) Receive Sensitivity
6MBit/s 25 -96
54MBit/s 21 -80
MCS0 25 -96
MCS7 20 -75
MCS9 18 -70

Ethernet test results

RBLDFG-5acD IPQ-4018 1G one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 82,2 998.2 243,9 999.0 1484,8 760.2
Bridging 25 bridge filter rules 82,2 998.2 243,9 999.0 359,2 183.9
Routing none (fast path) 82,2 998.2 243,9 999.0 1488 761.9
Routing 25 simple queues 82,2 998.2 243,9 999.0 506,3 259.2
Routing 25 ip filter rules 82,2 998.2 240,8 986.3 242,9 124.4
  • All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  • Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  • Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  • Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Product Condition New
Manufacturer part number RBLDFG-5acD
Manufacturer Mikrotik
Frequency 5.2 GHz, 5.3 GHz, 5.4 GHz, 5.x GHz
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.