Engenius N-Enstation Kit High-Powered Long-Range 2.4 GHz Outdoor AP/Bridge Kit

ENG-N-ENSTATION2KIT
N-Enstation Kit
Engenius

$199.99

lazyload

lazyload

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

The N-EnStation2 Kit is a set of two (2) 2.4 GHz High-Powered, Long-Distance Wireless N300 Outdoor AP/Client Bridges with a high-gain 13 dBi dual-polarization internal directional antenna that acts as a scalable small business and enterprise Access Point solution ideal for Point-to-Point deployments up to 5 miles. Each device includes two (2) Fast Ethernet ports and is housed in an IP55-rated waterproof housing to maintain robust performance even in harsh environments. This cost effective bundle is a smart solution for streaming video data for IP Cameras monitoring parking lots and it includes an additional Fast Ethernet Port (LAN 2) to connect a camera for this type of application.

Going The Distance. EnGenius EnStations are Outdoor Wireless Access Points that feature high 26 dBm output power and high receive sensitivity coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver robust and stable connectivity over extremely long distances — up to 4 miles in clear line-of-sight point-to-point deployments! EnStations, therefore, are ideal for:

  • extending networks in large campus venues;
  • over extensive acreage in industrial, farming or ranching properties;
  • in massive indoor structures like arenas, shopping malls, warehouses, convention centers;
  • connecting to digital signage;
  • or even in more urban environments where there is clear line-of-sight between the EnStation and another Access Point; or between two EnStation units of the same frequency band.

EnStations can be used in Client Bridge mode and pointed to a Wireless Internet Service Provider’s base station making them ideal CPE (Customer Premise Equipment) that can generate recurring revenue for Internet providers. The compact form factor of EnStation also make it acceptable to many homeowners associations because they are barely noticeable and unobtrusive additions to home exteriors and usually within the guidelines of a planned community’s architectural standards.

Longer connectivity distances can be achieved when two EnStation units of the same frequency band are paired together in a Point-to-Point deployment such as in this kit, and aligning their respective dish-shaped antennas to be directly facing each other so each gets the full impact of the more focused narrow wireless single beam. Add to existing networks to cover long distances where cabling is impractical or cost prohibitive, helping to save time and resources. In addition, no subscription fees are required, lowering the total cost of ownership of the solution.

Each EnStation supports three (3) operation modes - Access Point, Client Bridge, and WDS Bridge mode. This flexibility makes N-EnStation2 Kit a versatile solution for IT managers who may need to update or reconfigure their deployments as the needs of their network change.

Each EnStation includes a proprietary PoE injector (EPE-1212) to supply power for the unit while at the same time providing a data connection over the same Ethernet cable. This is especially useful for deployments where a power outlet for the AP/Client Bridge may be scarce or unavailable, for example under the eaves of roofs, or high on light poles.

The N-EnStation2 Kit also employs advanced QoS (Quality of Service) to prioritize bandwidth-intensive applications like video streaming or bandwidth sensitive applications like VoIP (Voice over IP) telephone calls for optimal connectivity.

EZ Controller™ software for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks. Available as a free download. Click here for the latest version of EZ Controller.

Industry-Standard Security
For secure network configurations, the EnStation2 includes reinforced wireless encryption standards such as Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) Encryption.

Simplified Monitoring and Management
Includes EZ Controller wireless software for Windows, Mac OS X or Linux (available as a free online download) for easier monitoring and maintenance after deployment on rooftops and other hard to reach places.

IP55-Rated Waterproof Housing
Designed to withstand extremely harsh environmental conditions via its water and dust proof IP55-Rated housing.

Product Condition New
Manufacturer part number N-Enstation Kit
Manufacturer Engenius
Frequency 2.4 GHZ
Specifications
Technical Specifications
Hardware RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Data Rate: Up to 300 Mbps in 2.4 GHz
Memory: 128MB
Flash Memory: 16MB
Transmit Power:
Up to 26 dBm
Up to 400 mW
Radio Chains/Spatial Streams – 3x3:3
Supported Radio Technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11n: Orthological Frequency-Division Multiplexing (OFDM)
802.11n: With 5/10/20/40 MHz Channel Width
Supported Modulation Types:
802.11b: BPSK QPSK, CCK
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Supported Data Rates (Mbps):
802.11b: 1, 2, 5.5, 11
802.11g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 (MCS0 to MCS15)
Antenna One (1) Internal High-Gain Directional Antenna
13 dBi GHz Antenna
Azimuth Beam Width (Horizontal): 18°
Elevation Beam Width (Vertical): 30°
Point-to-Point Transmission for Long Range Distances
2.4 GHz (Point 1)
Peak Antenna Gain: 13 dBi
Polarization: Linear
Horizontal Beam Width: 67°
Elevation Beam-Width: 33°
VSWR: 1:2.0
2.4 GHz (Point 2)
Peak Antenna Gain: 13 dBi
Polarization: Linear
Horizontal Beam Width: 61°
Elevation Beam-Width: 35°
VSWR: 1:2.0
Physical Interface Two (2) 10/100 BASE-T Ethernet Ports
One (1) Port supports 24V Proprietary PoE Input
One (1) Port supports extension of an Internet signal
Reset Button
LED Signal
Power
LAN 1
LAN 2
WLAN
Power Requirements Power Source (PoE Injector):
24V/.6A Proprietary Compliant Source
Active Ethernet (Power over Ethernet, PoE)
Power Consumption: 7.2 W
Peak Power Consumption: Up to 34 W
Management
Auto Channel Selection Settings varies by Regulatory Domains
Operation Modes Access Point, Client Bridge, WDS Bridge
LAN IP (check validity and DHCP server IP range) MAC
SSID BSSID
Supports Four (4) SSIDs
VLAN Tagging Independent VLAN settings cab be enabled/disabled
Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID)
VLAN Pass-through
VLAN Pass-through over WDS Bridge
SNMP & MIB V1/v2c/v3 Support
MIB I/II and Private MIB
QoS Compliant with IEEE 802.11e Standard
Other Management Features Save Configurations as Default
Saves the customized configuration as the default value for different customer demands
Client Traffic Status
Reports various information in a timely manner as required by the administrator
Control Features RADIUS Accounting
Helps operators to offload 3G to Wi-Fi seamlessly
Settings vary by Regulatory Domains
Distance Control (Ack Timeout)
Multicast Supported
Wi-Fi Scheduler
Sets the Schedule for rebooting the device
Security WEP Encryption: 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering
Filter up to 50 MAC addresses
Wireless STA (Client) Connection List
Reports various information in a timely manner as required by the administrator
802.1x Authenticator
Environmental & Mechanical
Temperature Range Operating: -4°F to 140°F (-20°C to 60°C)
Storage: -22°F to 176°F (-30° to 80°C)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
Waterproof IP55-Rated Enclosure
Certifications FCC, CE
Dimensions & Weights
Package Contents EnStation2 Outdoor CPE
PoE Injector (EPE-1212) with Power Adapter (24V/.6A)
Pole/Wall Mounting Kit
Mounting Screw Set
Quick Installation Guide
Warranty 1 Year
Key Features
  • IEEE 802.11 b/g/n compliant
  • Up to 300Mbps (2.4GHz)
  • 13dBi Directional high gain antenna
  • 24V Proprietary PoE support
  • Waterproof Housing IP55 rated
  • AP/CB/CR/WDS Mode support
  • 4 SSIDs support per radio + VLAN tagged supported
  • Web Configuration and EZ controller software
  • SNMP V1/ V2c/V3, MIB I/II supported
  • WEP/WPA/WPA2 wireless encryption
  • IPV4/IPV6 support
  • Narrow Bandwidth Support
Software Click here for the latest version of EZ Controller (Windows, Mac & Linux OS)
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
Technical Specifications
Hardware RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Data Rate: Up to 300 Mbps in 2.4 GHz
Memory: 128MB
Flash Memory: 16MB
Transmit Power:
Up to 26 dBm
Up to 400 mW
Radio Chains/Spatial Streams – 3x3:3
Supported Radio Technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11n: Orthological Frequency-Division Multiplexing (OFDM)
802.11n: With 5/10/20/40 MHz Channel Width
Supported Modulation Types:
802.11b: BPSK QPSK, CCK
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Supported Data Rates (Mbps):
802.11b: 1, 2, 5.5, 11
802.11g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 (MCS0 to MCS15)
Antenna One (1) Internal High-Gain Directional Antenna
13 dBi GHz Antenna
Azimuth Beam Width (Horizontal): 18°
Elevation Beam Width (Vertical): 30°
Point-to-Point Transmission for Long Range Distances
2.4 GHz (Point 1)
Peak Antenna Gain: 13 dBi
Polarization: Linear
Horizontal Beam Width: 67°
Elevation Beam-Width: 33°
VSWR: 1:2.0
2.4 GHz (Point 2)
Peak Antenna Gain: 13 dBi
Polarization: Linear
Horizontal Beam Width: 61°
Elevation Beam-Width: 35°
VSWR: 1:2.0
Physical Interface Two (2) 10/100 BASE-T Ethernet Ports
One (1) Port supports 24V Proprietary PoE Input
One (1) Port supports extension of an Internet signal
Reset Button
LED Signal
Power
LAN 1
LAN 2
WLAN
Power Requirements Power Source (PoE Injector):
24V/.6A Proprietary Compliant Source
Active Ethernet (Power over Ethernet, PoE)
Power Consumption: 7.2 W
Peak Power Consumption: Up to 34 W
Management
Auto Channel Selection Settings varies by Regulatory Domains
Operation Modes Access Point, Client Bridge, WDS Bridge
LAN IP (check validity and DHCP server IP range) MAC
SSID BSSID
Supports Four (4) SSIDs
VLAN Tagging Independent VLAN settings cab be enabled/disabled
Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID)
VLAN Pass-through
VLAN Pass-through over WDS Bridge
SNMP & MIB V1/v2c/v3 Support
MIB I/II and Private MIB
QoS Compliant with IEEE 802.11e Standard
Other Management Features Save Configurations as Default
Saves the customized configuration as the default value for different customer demands
Client Traffic Status
Reports various information in a timely manner as required by the administrator
Control Features RADIUS Accounting
Helps operators to offload 3G to Wi-Fi seamlessly
Settings vary by Regulatory Domains
Distance Control (Ack Timeout)
Multicast Supported
Wi-Fi Scheduler
Sets the Schedule for rebooting the device
Security WEP Encryption: 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering
Filter up to 50 MAC addresses
Wireless STA (Client) Connection List
Reports various information in a timely manner as required by the administrator
802.1x Authenticator
Environmental & Mechanical
Temperature Range Operating: -4°F to 140°F (-20°C to 60°C)
Storage: -22°F to 176°F (-30° to 80°C)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
Waterproof IP55-Rated Enclosure
Certifications FCC, CE
Dimensions & Weights
Package Contents EnStation2 Outdoor CPE
PoE Injector (EPE-1212) with Power Adapter (24V/.6A)
Pole/Wall Mounting Kit
Mounting Screw Set
Quick Installation Guide
Warranty 1 Year