Engenius EWS5912FP Neutron Series 8-Port GigE 130W PoE+ Wireless Management Controller & L2 Switch

ENG-EWS5912FP
EWS5912FP
Engenius

In stock

$749.00

Only 1 left

lazyload

lazyload

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

The EWS5912FP is a Neutron Series Managed Wireless solution 8-Port Gigabit PoE+ Layer 2 Switch with 2 Gigabit uplink ports and 2 Dual-Speed SFP ports for fiber uplinks. As part of an EnGenius Neutron Series wireless management solution, the EWS5912FP through its browser-based GUI (Graphical User Interface) can discover, configure, manage and monitor up to 20 Neutron Series Wireless Access Points. The Controller mode of the Switch provides a suite of wireless management features for IT managers to configure Neutron Series Access Points. Features include clustering Neutron Series Access Points in clusters with identical policies, Access Point IP Auto-Discovery, remote Access Point rebooting for hard-to-reach / previously deployed units, and a host of visual monitoring features including topology and floor plan view modes for the mapping out and tracking of networks. The controller also features a statistics section for record traffic tracking and comparison between units or over-time comparisons.

Rack Mountable
The EWS7928FP includes bracketing hardware for mounting onto a standard switch rack.

AP Auto IP-Assignment
Assign an IP address range for wireless clients connecting to the network.

Full-Featured Layer 2 Manageability
Includes support for VLAN, QoS, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and much more.

Product Condition New
Manufacturer part number EWS5912FP
Manufacturer Engenius
Specifications
Technical Specifications
Standard Switching Capacity: 24Gbps
Forwarding Mode: Store and Forward
SDRAM: 256MB
Flash Memory: 32MB
Port Functions 8 10/100/1000Mbps Ports in the front panel
2 100/1000Mbps SFP Slot
2 Gigabit Uplink Ports
1 RJ45 Console Port
t
PoE Capability PoE standard: Port 1~8 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~8 can output up to 30W
Power budget: 130 watts
LED Indicators Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports: LAN/PoE Mode, Link/Act
SFP Ports: Link/Act
Environmental & Mechanical
Temperature Range Operating: 32°F to 132°F (0°C to 50°C)
Storage: -40°F to 158°F (-40° to 70°C)
Humidity (non-condensing) 5% - 95%
Wireless Management Features
(with Neutron Series Access Points)
Manages up to 20 Neutron Series APs
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Band Steering
Traffic Shaping
Fast Handover
Fast Roaming
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics

* Mesh networking mode available soon as a free firmware upgrade
Device Dimensions & Weights Weight: 4.4 lbs.
Width: 13.00" (330.20 mm)
Length: 9" (228.60 mm)
Height: 1.73" (43.94 mm)
Warranty 1 Year
L2 Features
Includes: 802.3ad compatible Link Aggregation
Port Mirroring
Port Trunking
Spanning Tree Protocol:
  • 802.1D Spanning Tree (STP)
  • 802.1w Rapid Spanning Tree (RSTP)
  • 802.1s Multiple Spanning Tree (MSTP)
IGMP Snooping v1/v2/v3
IGMP Fast Leave
VLAN Group
Voice VLAN
MLD Snooping
Queue:
  • CoS based on 802.1p priority
  • CoS based on physical port
  • CoS based on TOS
  • CoS based on DSCP
802.1X Port-based Access Control
802.1X Guest VLAN
Port security
Storm control
Port Isolation
Attack Prevention
Access Control List (ACL)
PoE management:
  • Power on/off per port
  • Power class configuration
  • Power feeding with priority
  • User defined power limit
SSH Server
Telnet Server
TFTP Client
BootP/DHCP Client
Web-based support
SNMP v1 support
SNMP v2c support
SNMP v3 support
TFTP upgrade
Command Line Interface (CLI)
SNTP
RMONv1
SYSLOG
Cable Diagnostic
MIB Support:
  • RFC1213
  • RFC1493
  • RFC1757
  • RFC2674
Key Features
  • Simple to use, manage, and deploy
  • A full-featured Layer 2 PoE+ Switch with Wireless Management Capability
  • Centrally manage and monitor up to 20 EnGenius Neutron Series Wireless Access Points
  • Automatic Neutron Series Access Point Discovery and Provisioning
  • Wired and Wireless Network Management and Monitoring
  • Wireless Access Points Group
  • IEEE 802.3at/af PoE on its 8 Gigabit Ports with a total PoE budget of 130 Watts
  • Includes 2 Gigabit Port and 2 Dual-Speed SFP (fiber) uplink ports for integrating with an existing network or cascading to other Switches
  • Up to 24Gbps non-blocking switching capacity
  • Easy to manage and configure via a Web-based Graphical User Interface (GUI)
  • Cable Diagnostics
  • Advanced Features: 802.1X, ACLs, IGMP Snooping, SNMPv1/v2/v3, RSTP, MSTP
  • Link Aggregation
  • Port Security
  • Command Line Interface (CLI)
Software Switch Format Rackmount
Switch Type Managed, POE/Power Over Ethernet
Switch PoE Port 8-Port
POE Compliant PoE+, 802.3 AF, 802.3 AT
Switch Port 8-Port
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
Technical Specifications
Standard Switching Capacity: 24Gbps
Forwarding Mode: Store and Forward
SDRAM: 256MB
Flash Memory: 32MB
Port Functions 8 10/100/1000Mbps Ports in the front panel
2 100/1000Mbps SFP Slot
2 Gigabit Uplink Ports
1 RJ45 Console Port
t
PoE Capability PoE standard: Port 1~8 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~8 can output up to 30W
Power budget: 130 watts
LED Indicators Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports: LAN/PoE Mode, Link/Act
SFP Ports: Link/Act
Environmental & Mechanical
Temperature Range Operating: 32°F to 132°F (0°C to 50°C)
Storage: -40°F to 158°F (-40° to 70°C)
Humidity (non-condensing) 5% - 95%
Wireless Management Features
(with Neutron Series Access Points)
Manages up to 20 Neutron Series APs
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Band Steering
Traffic Shaping
Fast Handover
Fast Roaming
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics

* Mesh networking mode available soon as a free firmware upgrade
Device Dimensions & Weights Weight: 4.4 lbs.
Width: 13.00" (330.20 mm)
Length: 9" (228.60 mm)
Height: 1.73" (43.94 mm)
Warranty 1 Year
L2 Features
Includes: 802.3ad compatible Link Aggregation
Port Mirroring
Port Trunking
Spanning Tree Protocol:
  • 802.1D Spanning Tree (STP)
  • 802.1w Rapid Spanning Tree (RSTP)
  • 802.1s Multiple Spanning Tree (MSTP)
IGMP Snooping v1/v2/v3
IGMP Fast Leave
VLAN Group
Voice VLAN
MLD Snooping
Queue:
  • CoS based on 802.1p priority
  • CoS based on physical port
  • CoS based on TOS
  • CoS based on DSCP
802.1X Port-based Access Control
802.1X Guest VLAN
Port security
Storm control
Port Isolation
Attack Prevention
Access Control List (ACL)
PoE management:
  • Power on/off per port
  • Power class configuration
  • Power feeding with priority
  • User defined power limit
SSH Server
Telnet Server
TFTP Client
BootP/DHCP Client
Web-based support
SNMP v1 support
SNMP v2c support
SNMP v3 support
TFTP upgrade
Command Line Interface (CLI)
SNTP
RMONv1
SYSLOG
Cable Diagnostic
MIB Support:
  • RFC1213
  • RFC1493
  • RFC1757
  • RFC2674