Engenius EWS310AP Neutron Series Dual-Band Wireless N600 Managed Indoor Access Point

ENG-EWS310AP
EWS310AP
Engenius

$279.00

  • Product Description
  • Reviews
  • Additional Information
  • Tags
  • Product Video
  • Specifications

The Dual Band (up to 300 + 300 Mbps) Ceiling Mount EWS310AP can operate as a stand-alone Access Point connecting to third-party PoE-capable (IEEE 802.3at/af) Switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management Solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Controller/Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS310APs from Neutron Series Controller/Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

SSID-to-VLAN Tagging
Can be configured to broadcast up to 8 SSIDs. Each SSID can be tagged to a specified network VLAN for different user access tiers based on established access rights.

Product Condition New
Manufacturer part number EWS310AP
Manufacturer Engenius
Frequency 2.4 GHZ, 5.2 GHz, 5.3 GHz, 5.x GHz
Specifications
Technical Specifications
Hardware RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 16MB
Peak Power: Up to 15.6W
Antenna Four (4) Internal 5 dBi Omni-Directional Antennas RF: 2.4 and 5 GHz Frequency Bands
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector
Power Requirements Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Software
Operation Modes Access Point, Mesh AP (available soon)
Multiple BSSID Supports up to 8 BSSIDs
LAN IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Spanning Tree Supports 802.1d Spanning Tree Protocol
Wireless Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission Rate 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
Wireless Management Features
(with a Neutron Series Switch)
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Traffic Shaping
Fast Handover
Seamless Roaming (requires RADIUS server)
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics

* Mesh networking mode available soon as a free firmware upgrade
Management
Tx Power Control Adjust transmit power by dBm
Configuration Web-based configuration (http)
Firmware Upgrade Via web browser, settings are reserved after upgrade
Administrator Setting Administrator Username and Password Change
Reset Setting Reboot (press and hold for 2 seconds)
Reset to factory default (press and hold for 10 seconds)
System Monitoring Status Statistic and Event Log
SNMP V1, V2c, V3
MIB MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping Incoming and outgoing wireless traffic shaping
Auto-channel Selection Automatically selecting least congested channel
Bandwidth Measurement IP range and bandwidth management
Auto Reboot Reboot Access Point by minute, hour, day, or week
Backup and Restore Save and restore settings through Web interface
CLI Supports Command Line Interface
Diagnosis IP pinging statistics
Log SysLog and Local Log support
LED Control On/Off
AP Detection Scanning for available EnGenius APs
Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
QoS (Quality of Service) WMM (Wireless Multimedia)
Environmental & Physical
Temperature Range Operating: 0° to 50°C (32° to 122°F)
Storage temperature: -20°C to 60°C (-4F° to 140°F)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
Certifications FCC, IC
Dimensions & Weights
EWS310AP Device Weight: 0.8 lbs.
Length: 6.36” (161.54mm)
Width: 6.36” (161.54mm)
Height: 1.64” (41.66mm)
Package Contents EWS310AP Dual Band N600 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
Warranty 1 Year
Key Features
  • Access Point Mode / Mesh AP Mode (with Controller Interface)
  • Sectorized 3D Antenna (select models)
  • Dynamic Channel Optimization
  • Guest Network
  • Band Steering
  • Fast Handover
  • Fast Roaming
  • Supports connectivity of up to 100+ users
  • WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA-Enterprise, WPA2- Enterprise, WPA-Mixed Enterprise
  • 16 SSIDs (8 SSIDS per frequency band)
  • Wireless Traffic Shaping
  • 802.1q VLAN
  • QoS
  • IPv6
  • Spanning Tree Protocol (STP)
  • SSID to VLAN Mapping
  • SNMP
  • CLI/SSH/Https
  • VLAN Isolation
  • Client Isolation
  • Ping Test/Traceroute Test/Speed Test
  • Other Features for Stand-alone Mode
    • Email Alert
    • WiFi Scheduler
    • Auto Reboot
    • Date and Time Settings
    • LED Control
    • SYSLOG
    • SNMP v1/v2c/v3
    • Wireless MAC Filter
    • AP Detection
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

 
Technical Specifications
Hardware RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 16MB
Peak Power: Up to 15.6W
Antenna Four (4) Internal 5 dBi Omni-Directional Antennas RF: 2.4 and 5 GHz Frequency Bands
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) - PoE capable
1 x Reset Button
1 x Power Connector
Power Requirements Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Software
Operation Modes Access Point, Mesh AP (available soon)
Multiple BSSID Supports up to 8 BSSIDs
LAN IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
Spanning Tree Supports 802.1d Spanning Tree Protocol
Wireless Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission Rate 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
Wireless Management Features
(with a Neutron Series Switch)
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Traffic Shaping
Fast Handover
Seamless Roaming (requires RADIUS server)
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics

* Mesh networking mode available soon as a free firmware upgrade
Management
Tx Power Control Adjust transmit power by dBm
Configuration Web-based configuration (http)
Firmware Upgrade Via web browser, settings are reserved after upgrade
Administrator Setting Administrator Username and Password Change
Reset Setting Reboot (press and hold for 2 seconds)
Reset to factory default (press and hold for 10 seconds)
System Monitoring Status Statistic and Event Log
SNMP V1, V2c, V3
MIB MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping Incoming and outgoing wireless traffic shaping
Auto-channel Selection Automatically selecting least congested channel
Bandwidth Measurement IP range and bandwidth management
Auto Reboot Reboot Access Point by minute, hour, day, or week
Backup and Restore Save and restore settings through Web interface
CLI Supports Command Line Interface
Diagnosis IP pinging statistics
Log SysLog and Local Log support
LED Control On/Off
AP Detection Scanning for available EnGenius APs
Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
QoS (Quality of Service) WMM (Wireless Multimedia)
Environmental & Physical
Temperature Range Operating: 0° to 50°C (32° to 122°F)
Storage temperature: -20°C to 60°C (-4F° to 140°F)
Humidity (non-condensing) Operating: 90% or less
Storage: 90% or less
Certifications FCC, IC
Dimensions & Weights
EWS310AP Device Weight: 0.8 lbs.
Length: 6.36” (161.54mm)
Width: 6.36” (161.54mm)
Height: 1.64” (41.66mm)
Package Contents EWS310AP Dual Band N600 Indoor Access Point
12V/2A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
Warranty 1 Year